Cabinet construction

Are your cabinets RTA - ready to assemble?
All cabinet parts are cut to size, line drilled, dadoed and milled for Confirmat assembly, with 8mm hardwood dowels inserted as required, for easy assembly by the customer. Backs are dadoed into ends, tops and bottoms, and are fully housed after box assembly.

Do drawer boxes require assembly?
Drawer boxes are delivered assembled, ready to be installed.

Are the cabinets edgebanded?
All cabinet box front edges will be edgebanded with PVC’s. The edges may be left raw for customer supplied face frame.

What materials (type and thickness) are the side, top, bottom and back panels made of?
The top, bottom, and side panels are made of melamine faced particle board. The thickness comes at 3/4".

Is there a standard base/kick plate configuration?
The standard kick toe height is 4". It can be covered with the same material as the cabinet doors or with aluminum faceplate.

What is the exterior finish and what sides it is applied to?
All cabinet doors are finished with natural real wood Italian veneers - NO laminates, NO imitation. All doors are finished with the same high quality veneers to the front, rear, and all sides edging. End cabinets which will expose one of their sides are provided with an end panel finished with the same veneer as the chosen door style.

What is the interior finish?
The standard interior finishes, referring to the box, are either white, black or maple grain. We can also provide other varieties of wood grain finishes which are subject to additional quote.

Are the cabinets drilled to accommodate adjustable shelf clips?
Box ends are line drilled with 5mm diameter holes on 32mm centers, to accommodate adjustable shelf clips and/or 32mm European-type hardware.

What materials and finishes are the shelves made of?
The shelves are made with the same materials as the box.

Are these all frameless boxes (i.e. no front frame)?
All cabinets come frameless with euro style doors.

What drawer and shelf configurations are available, or is it anything we design?
Drawer and shelf configurations are built according to your preferences and needs. In general, most of the times we suit customer's needs unless we deem that there are space restrictions not allowing particular configuration.

More information on our kitchen cabinets