How to Make Slatwall Panels: Tips From the Pros

If you’re preparing for a home renovation, wood slatwall panels are a great choice! Stylish, functional, and with a broad range of options to suit all budgets, slatwall panels have become the go-to choice for homeowners looking to create a feature wall for their interior design ideas.

So, what are slatwall panels? Slatwall consists of a series of horizontal slats that are attached to a frame, creating a flat panel with evenly-spaced gaps between the slats. 

Slatwall panels can also hang objects, such as shelves, hooks, or brackets. Make sure you know how much weight slatwall can hold before deciding if you want to use your slatwall as a storage solution.

So, how are slatwall panels made? If you’re the DIY type, this article will dive into the process of creating slatwall panels. If you’re not up for the headache, 27estore has you covered with the best panels on the market!

Before you get started, you will need to collect the following materials:

• Slat strips: You can use wood, aluminum, medium-density fibreboard (MDF), or polyvinyl chloride.
• Frame materials: Sheets of plywood or a metal frame
• Glue
• Clamps
• Saw or other cutting tool 

Don’t forget to wear protective gear when working! Goggles, masks, and gloves can be helpful when using the saw or strong chemicals.

Once you have your materials, the next step is knowing how to install wood slatwall. Let’s take a look at the steps involved:

Cut your panels to the desired length. For wooden slatwall, you'll want to use a saw to carefully trim each strip to the correct length. Be sure to take meticulous measurements to avoid waste.

Next, lay out your frame materials. Depending on what you're using for your frame, you may need to cut it down to size, as well. Once you have your frame ready, lay it out on a flat surface.

Apply glue to the back of each slat strip. Use a generous amount of glue to ensure a strong bond between the slats and the frame.

Carefully place each slat strip onto the frame, spacing it out and aligning it with the other slats. Use clamps to hold everything in place while the glue dries.

This is the easiest part–allow the glue to dry! Depending on the type of glue you're using, you may need to wait anywhere from a few hours to a full day before the slatwall panel is fully dry and ready to use.

• Paint or stain your slatwall panels to match the surrounding decor.
• Install shelving, hooks, or other storage solutions onto the gaps between the slats.
• Add decorative framing materials, such as trim or molding, to give your panels a more polished look.
• Add lighting to bring more focus and warmth to your newly installed slatwall.

Once you’re satisfied with the final look, it’s time to enjoy your new interior!

With the right tools and materials, you can create your own slatwall panels at home. Of course, the process of cutting your own slats to create a paneled wall can be daunting, which is why 27estore has you covered with a wide variety of wooden slatwall panels to suit any taste or budget. Check out our selection today!